When you are happy and happy to buy a new home, you are busy making your own home. The picture shows that you live comfortably. I did not expect that because of the negligence of the purchase of decorative materials, it took a long time (after a rainy season) that the wall was blistering and wrinkled. From the skin, de-powdering, shedding, mildew, discoloration, produce musty. In home decoration, many owners even include construction teams, only pay attention to the choice of paint and ignore the importance of the putty layer. In fact, people in the industry all know that there has always been a “three-point paint putty seven†statement, the basic work of the brushing operation is to putty, it plays a role in the leveling and bonding between the rough wall and the coating film. The effect of building beauty.
Over the years, construction has paid less attention to the quality of putty. As long as it is well-constructed, it will be considered “qualified†at that time, and will not be affected by future factors such as wall seepage, sun exposure, and ultraviolet radiation. Generally considered to be paint, latex paint is not good, no one always find the problem of putty layer. PuTTY is not water-resistant. In the past, the construction unit or construction unit did not pay much attention to the choice of putty. They only care about what brands and grades of paint are used. They always think that putty is not related to the overall situation, especially when the construction is completed and accepted. , simply can not see the putty, just for paint coating effect, ignoring the paint's internal putty quality such as putty strength, putty is water-resistant and Other related performance indicators. When the paint peels off and falls off, the project has already been handed over. After that, it is repaired and tinkered year after year. Even after some putty scraping is finished, the paint is still falling. Skin, shedding. Because the putty layer itself has been powdered and peeled off.
Most of the cement used in today's projects are chemical pastes of 107-gel + talcum powder + cellulose derivatives. They are mixed into glue putty and smeared walls. Wall peeling, discoloration, cracking, falling off after wet and rain, and the like have become common. A common problem affecting the quality of the project caused the whole wall paint to fall down. If the skin does not exist, the hair will be attached. Putty is off, how can the coating? In particular, external wall engineering is even more important. To achieve the desired coating effect, it requires 100% water-resistant and external wall putty powder. Putty powder technical performance indicators requirements: standard state bond strength> 0.7MPa, 48 hours after soaking the bond strength must be greater than the standard state of the bond strength several times more than in order to ensure the harsh weather of the outer wall requirements In order to be able to withstand exposure to the sun, rain and ultraviolet rays, it will last a long time and really play the role of architectural beauty.
Dry powder putty and ordinary putty performance comparison
Dry powder putty is an excellent substitute for common putty. Its key raw materials are imported materials. Dry powder putty and ordinary putty have obvious advantages and disadvantages.
Dry powder putty features:
1. Strong adhesion, high bonding strength, certain toughness, good air permeability, no chalking after damp, and strong water resistance.
2. No cracking, peeling, peeling, etc. will occur for a long time.
3. The wall surface feels delicate, the appearance is soft, and the texture is good.
4. After the wall surface is contaminated, it can be scrubbed directly. When the wall surface is painted again, it is not necessary to remove the wall surface.
5. The materials used are all environmentally friendly and do not contain toxic substances such as benzene, xylene, and formaldehyde.
Common putty features:
1. Adhesion is poor, bonding strength is low, there is no toughness, powdery phenomenon will soon appear after the tidal gas.
2. Cracking, peeling, peeling, etc. occur in a short time.
3. When painting the wall again, it is necessary to eradicate the original putty, laborious and pollute the environment.
4. The surface is not delicate enough and the texture is poor.
5. The materials used generally contain toxic substances.
Paint, paint, paint, paint, decoration, home decoration, home improvement paint
Ningbo Kyson Cool Electronic Technology Co., Ltd. , https://www.kysonrefrigeration.com