In the common glass partition, the ordinary glass partition is simple and clear, the stained glass partition is beautiful and refined, the sandblasted or carved glass partition is noble and elegant, the cracked glass partition is ethereal and mysterious... The strange visual effects are all created by relying on different materials.
The glass partition of the crack effect must be crushed by a special tempered glass and then glued by a special process, so there will be no two identical patterns, which is in line with the modern personality. The first point in choosing such a glass partition is to pick the pattern. The crack stretches fresh and works best.
Ordinary glass partitions seem to be simple, but it is not. The best of these is the laminated glass that is still rare on the market. The advantage of this kind of glass is that the surface looks the same as ordinary glass, but in the event of an accidental impact, the glass fragments will be firmly adhered to the SaflexPVB film in the glass, without collapsing debris, and will not be personal. Security poses a threat.
The stained glass partition is the main body of the partition with the color art glass, which uses the fantastic color transformation to create extraordinary artistic effects. Therefore, the use of stained glass partitions, the most important thing is that the color tone should be consistent with the overall decoration style of the room. It must be emphasized that when the area of ​​a single piece of glass is too large (such as more than 1 square meter), there is a relatively large safety hazard in terms of architecture. Therefore, the glass should be separated as much as possible without affecting the overall effect. In small pieces, or increase the proportion of the frame appropriately, reduce the chance of glass collision.
If you can find a satisfactory color laminated glass is also a good choice. Sandblasted glass cuts off its shackles and near-luxury effect, which is unmatched by other types of products. The requirements for materials for engraved and sandblasted glass partitions are also the most demanding. According to industry insiders, glass partitions are generally required to be made of raw materials with high strength and excellent safety performance. Both tempered glass and laminated glass can meet their requirements. However, when glass is engraved, the strength of the tempered glass will be drastically reduced, and even scratches on the surface will have such an effect. These defects work when the stress increases, and the most common is to cause the glass to crack. Therefore, it is not appropriate to use tempered glass for engraving and sandblasting, and other types of glass such as interlayers should be used.
In addition, if you need to use sound insulation when using glass partitions, it is best to use laminated glass with an intermediate film. The US Solutia company has rigorously tested the performance of the SaflexPVB membrane, and the experiment showed that the membrane has the effect of acoustic wave barrier. The glass processed by this film has a noise blocking effect of 40 decibels above 500 Hz, which is equivalent to a soft whisper from the center of the road. The above is the requirement for the glass material when installing the partition. Consumers must treat it with care and not neglect it.
Non-Toxic Calcium Zinc Stabilizer
Calcium Zinc Stabilizer are mainly used for all kinds of PVC products. It is produced by Calcium ,Zinc Organic stabilizer with the amount of chelating agent,lubricants and other internal and external components with the company's unique processing technology.The product contains the right amount of complex antioxidant system and other functional polymer additive,which can significantly increase finished goods' performance and improve the surface luster.
Ca/Zn Stabilizer, Calcium Zinc Stabilizer, Non-Toxic Stabilizer
Shandong Novista Chemicals Co.,Ltd (Novista Group) , http://www.novistachem.com