During the operation of the crusher, some faults may be encountered. In some cases, the emergency stop is required. The timely stop can prevent the crusher from being damaged and the personal safety accident. Therefore, to understand more about the crusher related knowledge, can make the crusher more stable and smooth in the production process, the following Shanghai Shanzhuo made the following points which are in need of crusher emergency stop:
1. The temperature of the crusher's main bearing or ballast bearing suddenly rises by more than 80 degrees, or somebody may say how we should judge whether the bearing temperature has exceeded 80 degrees. The simplest method is to use our hand to touch the bearing seat. If it does not last longer than one second, it means the temperature is too high. Remind: (If it is because of bearing high-temperature shutdown conditions, do not immediately stop, first stop the mine, increase the amount of oil, forced air or water cooling, wait until the bearing temperature drops down.)
2. When the crusher is working, the high-speed rotating transmission parts are loosened and fractured. It is necessary to stop the vehicle in time so as not to damage the damaged transmission parts.
3. If it is found that the jaw crusher motor emits smoke, stop it in time.
In the process of using the crusher, the working person needs to continuously check the use of the crusher, so that the fault can be found in a timely manner, and the fault can be solved in time to prevent the crusher from being seriously damaged.
222
1. The temperature of the crusher's main bearing or ballast bearing suddenly rises by more than 80 degrees, or somebody may say how we should judge whether the bearing temperature has exceeded 80 degrees. The simplest method is to use our hand to touch the bearing seat. If it does not last longer than one second, it means the temperature is too high. Remind: (If it is because of bearing high-temperature shutdown conditions, do not immediately stop, first stop the mine, increase the amount of oil, forced air or water cooling, wait until the bearing temperature drops down.)
2. When the crusher is working, the high-speed rotating transmission parts are loosened and fractured. It is necessary to stop the vehicle in time so as not to damage the damaged transmission parts.
3. If it is found that the jaw crusher motor emits smoke, stop it in time.
In the process of using the crusher, the working person needs to continuously check the use of the crusher, so that the fault can be found in a timely manner, and the fault can be solved in time to prevent the crusher from being seriously damaged.
222
Behappy Crafts (suzhou)Co.,Ltd , https://www.haoyuebehappy.com