The friends who choose to lay the wood-plastic floor during the decoration will encounter the problem of installing the plastic-wood floor. This often makes us feel very confused. I don’t know how to do it. So what should I do when the wood-plastic floor is installed? Is there any method and precautions? Let's take a closer look at the small series.
Plastic wood floor installation method
First, before the installation of plastic wood flooring
1. From the professional point of view of installing the floor, before starting the installation work, it is necessary to keep the plastic wood floor dry, smooth and clean, so as to ensure the smooth follow-up installation work.
2, ready to install tool drill, ordinary woodworking tools, labor gloves, stainless steel screws, etc., which is an essential tool for installing plastic wood flooring. The plastic wood floor is brittle. When fixing the floor and the keel, it is necessary to use the electric drill to guide the hole and then install the screw to avoid damage to the plastic wood floor.
Second, the indoor floor installation process
1. Fix the wood-plastic keel: Spread the plastic keel evenly on the concrete floor. It is recommended that the distance between each ridge is 30cm. Use an electric drill to guide the hole in the keel. The diameter of the pilot hole should not be smaller than the diameter of the screw. Then screw the screw into the drilled hole and fix the keel on the concrete floor. The nail head should be screwed into the keel. Do not expose it to the outside. Otherwise, the floor may be caused. The layout is not flat.
2. Fix the first floor: There are Yin and Yang slots on the left and right sides of each plastic wood floor. When paving the first floor, you can use a woodworking tool to saw off or grind the sun groove on the outside of the first floor. Then use the electric drill hole on the surface of the floor to open the screw and fix it on the keel. .
3. Fix the second floor: clamp the male slot of the second plastic-wood floor to the female slot of the first floor, and then drill the hole on the side of the second slot of the second floor, screw it into the screw to fix it. On the keel, the screw spacing can be controlled by the construction personnel during the installation process, not too dense, and it is guaranteed to be firm. The installation of the plastic wood floor in the back is the same as before, so there is no need to explain more.
Floor installation precautions
1. Wood plastic can be cut, sawed, drilled, and opened with ordinary woodworking machinery.
2. Fix the wood plastic keel on the floor with the expansion tube. The distance between the fixed points of the expansion tube is 500mm-600mm, the screw cap is lower than the surface of the wooden keel, and the wooden keel needs to be flat.
3. Self-tapping screws can be used between wood-plastic and wood-plastic. Stainless steel self-tapping screws are recommended for outdoor use. Self-drilling self-tapping screws should be used for plastic wood and steel.
4. When using self-tapping screws between wood-plastic and wood-plastic, the pilot hole should be used first, that is, pre-drilled. The diameter of the pre-drilled hole should be less than 3/4 of the diameter of the screw.
5. When installing the outdoor floor, use a screw between the wood-plastic profile and each keel.
6. The junction of the wood-plastic floor and the keel is connected with the keel by a plastic buckle.
Camping Light,Camping Lamp,Rechargeable Camping Lights,Torch Lanterns,LED Tent Light
Yuyao Flylit Appliance Co.,Ltd , https://www.flylitlight.com