Model NO.: Z-8*15-1M1
Min B.P: 2.4MPa
W.T: 0.227
Trademark: ORLETE
Specification: customized
Origin: Nanjing, China
rubber hose for fuel lineÂ
Vacuum Hose
Brief introduction of vacuum hose applied to auto brake system
Â
Application Environment | Sun, rain, snow, fog, wind, sand, dust erosion, salt spray, acid rain, dust |
Construction |
 |
Application | Auto brake system, applied to connect vacuum booster and engine |
Applicable Medium | Air |
Connection | Adopt clamp for convenient assembly & disassembly |
Accreditation Standards | GB16897-2010,NES D8601,JIS D2607-1999,Q/HMAC 103.143-208-2013 |
Â
Technical parameters
Accreditation Standards | TYPE | Size | (I.D) | (O.D) | Max W.P | Min B.P | W.T | ||
Min | Max | Min | Max | ||||||
(mm) | mm | mm | mm | mm | Mpa | Mpa | Kg/m | ||
GB16897-2010 | 8.7*17.5 | 8.7 | 8.43 | 9.23 | 16.8 | 17.7 | -0.1 | 2.4 | 0.227 |
9*17 | 9 | 8.7 | 9.3 | 16.5 | 17.5 | -0.1 | 2.4 | 0.227 | |
9*17.5 | 9 | 8.7 | 9.3 | 16.8 | 17.7 | -0.1 | 2.4 | 0.227 | |
NES D8601 | 8.7*17.5 | 8.7 | 8.5 | 9.4 | 16.8 | 18.1 | -0.1 | 2.4 | 0.227 |
JIS D2607-1999 | 9*17.5 | 9 | 8.7 | 9.3 | 17 | 18 | -0.1 | 2.4 | 0.227 |
Q/HMAC 103.143-208-20139 | 9*17.5 | 9 | 8.7 | 9.3 | 17 | 18 | -0.1 | 2.4 | 0.227 |
Â
Oil Inlet Hose
Â
Brief introduction of auto clutch master cylinder oil inlet hose
Â
Application Environment | Sun, rain, snow, fog, wind, sand, dust erosion, salt spray, acid rain, dust |
Construction |
 |
Application | liquid storage pot connection hose, clutch master cylinder oil inlett hose |
Applicable Medium | brake fluid |
Connection | Adopt clamp for convenient assembly & disassembly |
Accreditation Standards | Dongfeng passenger cars, Dongfeng Liuzhou Automobile, Jiangling, Chery, JAC, Geely |
Â
Technical parameters
Accreditation Standards | TYPE | Size | (I.D) | (O.D) | Max W.P | Min B.P | W.T | ||
Min | Max | Min | Max | ||||||
(mm) | mm | mm | mm | mm | Mpa | Mpa | Kg/m | ||
GB16897-2010 | 7.2*15 | 7.2 | 6.90 | 7.50 | 14.6 | 15.4 | 0.3 | 1.2 | 0.177 |
7.5*15 | 7.5 | 7.20 | 7.80 | 14.6 | 15.4 | 0.3 | 1.2 | 0.172 | |
8*14 | 8 | 7.80 | 8.20 | 13.7 | 14.3 | 0.3 | 1.2 | 0.135 | |
8*15 | 8 | 7.70 | 8.30 | 14.6 | 15.4 | 0.3 | 1.2 | 0.164 | |
8.5*16 | 8.5 | 8.20 | 8.80 | 15.6 | 16.4 | 0.3 | 1.2 | 0.188 | |
9*15 | 9 | 8.80 | 9.20 | 14.6 | 15.4 | 0.3 | 1.2 | 0.147 | |
9*17 | 9 | 8.70 | 9.30 | 16.6 | 17.4 | 0.3 | 1.2 | 0.212 |
Â
Water Hose
Â
Brief introduction of water hose
Â
Application Environment | Sun, rain, snow, fog, wind, sand, dust erosion, salt spray, acid rain, dust |
Construction |
 |
Application | cooling system, air conditioner heating system connection |
Applicable Medium | cooling liquid |
Connection | adopt clamp for convenient assembly & disassembly |
Accreditation Standards | QHMAC 102.215-202-2012,QJQ 1309-2014,HG/T 2491 |
Technical parameters
Â
TYPE | Size | (I.D) | (O.D) | Max W.P | Min B.P | W.T | ||
Min | Max | Min | Max | |||||
(mm) | mm | mm | mm | mm | Mpa | Mpa | Kg/m | |
13*21 | 13 | 12.50 | 13.00 | 20.5 | 21.5 | 0.2 | 1.2 | 0.278 |
16*24 | 16 | 15.50 | 16.00 | 23.5 | 24.5 | 0.2 | 1.2 | 0.327 |
28*36 | 28 | 27.00 | 28.00 | 35.5 | 36.5 | 0.2 | 1.2 | 0.523 |
34*42 | 34 | 33.00 | 34.00 | 41.5 | 42.5 | 0.2 | 1.2 | 0.621 |
Â
Packaging:
  * Generally: PVC bag in carton box with ORLETE logo
  * Can be customized based on your requirements
Lead time:
  * Fitting: common fitting within 30 days; special fitting within 40 days.
  * Brake hose: within 20 days.
  * Brake hose assembly: within 40 days.
Please noted: exact lead time is based on the order details.
Shipping:
  * About 30 minutes from our factory to Longtan port (Nanjing port)
  * Nanjing Lukou Airport is only about 40 minutes away
  * conveniently by air or by ocean
Why Choose Us?
Established in 1949, with over 65 years history
China's leading manufacturer of auto brake hoses & assemblies
550Â employees with bachelor, master and doctoral degree
With over 60 patents
With certifications of ISO9001, TS16949, CCC, CRCC, IRIS, SGS, etc
Our brake hoses are used on China leader's personal car
Â
How to select rubber hose?
1. Internal working medium of rubber hose: compressed air, water, engine oil, speed changing box oil, steam, etc.
2. Working temperature: including working medium temperature, surronding environment temperature.
3. Working pressure: normal operating pressure, max working pressure; to decide pulsating pressure and pulsating frequency, etc.
4. Working environment: if there is bending of rubber hose? What's the bending degree? If there is friction with car body?
5. Special requirements: including insulating property, electrical conductivity, flame retardant property, color appearance, etc
Â
We Also Produce:
Automobile Category:
   Auto brake hose & assembly
   Air conditioner hose & assembly
   Power steering hose & assembly
   Oil & water hose
   Rubber hose oil seal
   O-ring
Â
      Railway Category:
   Brake hose assembly
   General air hose assembly
   Average hose assembly
   High-speed EMU rubber hose & assembly
   Urban vehicle brake hose assembly
   Railway bearing oil seal
   Rail vehicle elastic side bearing
   Axial rubber gasket
Â
      Other Products:
   Gas rubber hose
   Engineering hose & assembly
   Other rubber hoses
Â
Â
Brief Introduction of Us:
Nanjing Orientleader Technology Co., Ltd. (ORLETE) is originally known as Nanjing 7425 Rubber & Plastic Co., Ltd., founded in April 1949 with Mr Ju Jianhong as the legal representative while controlled by China National Chemical Corporation. Our company located at No.7 Maigaoqiao Pioneer Park, Qixia District, Nanjing, China.
Â
As a digital enterprise specialized in rubber products R&D as well as high-end products manufacturing, so far we're China largest R&D and production base of auto brake hose, and also the designated R&D center of railway rubber products for China Railway Corporation. "ORLETE" and "7425" brand have a considerable reputation and credibility with exports to America, Japan and Southeast Asia, etc.
Â
Â
Our Workshop:
FAQ:
Q1: What kind of rubber hose that you produce?
 A:
Rubber brake hose
EPDM brake hose
Hydraulic brake hose
Hydraulic hose
Water hose
Fuel& oil hose
Brake hose
Stem hose
SAE J1401 brake hose
DOT 1/8" brake hose
OE No. brake hose
Flexible brake hose
Performance competition brake hose...
Â
Q2: Â What size of brake hose can you supply?
 A:  Common size: 3.2x10.5mm (1/8"); 4.8x12.5mm (3/16")
    Special size: 3.2x11mm...or your request size
Q3: Â Can you print the words (line) according to our requirements?
 A:  Yes, we can provide embossed and printing mark with different colors based on your requirements.
Q4: Â What kinds of fittings can you produce?
 A:  Various kinds. Female fitting, male fitting, banjo fitting, adepter brake hose fitting, bolts and nuts, steel with zinc , chrome, nickel...stainless steel, brass...
Q5: Â How many types of brake hose do you produce?
 A:  Brake hose, Teflon braided brake hose, PTFE stainless steel braided brake line, Steel tube, Bundy tube, Steel tube assembly, Brake hose assembly...
Q6: Â What is my order's delivery date?
  A: It usually takes 5-40 days, which depends on the order quantity.
Â
Thank you very much for your interest to our products
Your further inquiry will be highly appreciated
Â
Your further inquiry will be highly appreciated
The portable power station is lightweight and easy to carry. It is the best choice for travel lovers, and also for emergency use when out of power
Portable Power Station,Portable Energy Storage,Solar Energy Storage,Solar Panel Charging
Henan Idui Import and Export Trade Co., Ltd , https://www.acesunraylight.com