ZH-type vane adjustable axial flow pump introduction

Overview: ZH-type vane adjustable side mounted vertical axial flow pump, is the company based on market demand and the use of self-developed a new product. The pump is a liquid axial flow pump along the axial direction of the pump, characterized by large unipolar flow, lift range, high efficiency, applicability, water or physical and chemical properties of other liquids similar to water. Pumping small investment, high reliability, no vibration, low noise, etc. Widely used in urban water supply and drainage, industrial transport circulating water, irrigation and drainage and other aspects of agricultural irrigation. Structural features: 1, the pump directly connected with the motor through the motor bearings, looking down from the motor direction, the pump rotates clockwise. 2, the water pump axial thrust into a unit of internal force, not delivered to the foundation, greatly reducing the design load requirements of the basic strength. 3, pump installation, maintenance is very convenient, no intermediate transmission shaft. 4, the pump seal in the form of double-ended mechanical seal, almost no leakage, it runs smoothly. 5, all over-current components are made of high quality materials (316), effectively improve the anti-cavitation pump performance. Can transport 0 ~ 180 ℃ all kinds of strong corrosive media. Note: The pump in use, in addition to pay attention to the "general water pump" has the precautions (such as heavy pressure, blow and other external forces), but also pay attention to: 1, check the pump before running the rotation direction is correct, Pump operation is flexible; 2, Pump in operation if found to have abnormal noise, should immediately check the reasons; 3, The pump runs at normal speed, and gradually open the outlet gate valve, until the required flow, head So far, the pump in the long run, should be within the scope of the performance of the provisions of the operation, in order to obtain the best results; 4, the mechanical seal leakage is not greater than 10mL / h; 5, pump operation, the bearing surface temperature Under no more than 60 ℃, the temperature rise does not exceed 35 ℃; 6, After long-term use of the pump, when the flow pressure drops significantly, it should conduct a celebratory inspection, timely replacement of worn parts, reduce unnecessary losses.

Magic 3D LED Tube

Diameter 30mm Magic 3D LED Tube can make different shapes as you want, especially for top disco decoretion, led linear lighting .

The tubes are controlled by DMX Controller and software of Madrix, the Madrix software is a center of light, the software output information to DMX controller,

and controller transform the sign to tubes.it can change the color and moving of tube. tubes,software ,controller are connected by line,we have power line ,sign ling,and tube line, the lines can combine together. it's convenience for concert show and led light rental.Magic 3D Tube automatically address, it save time for DJ club, architecture light.

Maybe you want to know how to install a led Magic Tube, don't worry, we provide installation guide for you or we can send our engineer to your here to guide your team step by step, so that you can fix the Magic Tube easily. Regarding color changing led Magic Tube, you can control by DMX Artnet Controller.

Photo show of Magic 3D LED Tube:

Instuction Magic 3D tube

magic 3D LED tube

Magic 3D Led Tube,Led Linear Lighting,Outdoor Magic 3D Led Tube,3D Magic Vertical Tube

Shenzhen Iseeled Technology Co., Ltd. , https://www.iseeledlight.com

This entry was posted in on