In the production and acceptance of doors and window covers, the following points should be noted:
(1) Whether the original door openings, window holes, and sill boards are horizontal, vertical, and whether the size of the door openings are appropriate, and if there are any deviations, they should be corrected.
(2) Whether the original door frames and window frames are square, with or without deformation and looseness, if any, should be amended.
(3) The selected plate should meet the technical requirements, no shelling, no insect spots, smooth surface, fresh texture (doing this without mixing water paint).
(4) The seams should be tight, no hammer marks, no nail holes, and they should be applied as close as possible.
(5) The lines are flawless, crack-free, smooth, and straight, meeting the design requirements.
(6) Apply the squeegee to brush evenly at the instant, the thickness is about 0.2 mm, and the surface can be covered when it is not sticky.
(7) The base layer may adopt a frame structure or a plate structure.
(8) The spacing between the fixing jaws should be 15
Door and window acceptance window paint
Colour Laminated Glass is very similar to Clear Laminated Glass but with the addition of a coloured interlayer. These allow for a rich palette of colour permutation, ranging from subtle transparent and translucent colours to opaque. Our colour laminates are manufactured using float glass as standard although also available in specialist glasses including low iron (crystal clear) and a variety of body tints (blue, bronze and grey). The type and thickness of the glass will have an effect on the colour chosen.
Laminated glass is produced when two or more glass lites are permanently bonded with one or more plastic interlayers (PVB) using heat and pressure. The glass and interlayers can be a variety of colors and thicknesses. Laminated glass is often called [safety glass" because it meets the requirements of various code organizations. Laminated glass can be broken, but the fragments tend to adhere to the plastic layer and remain largely intact, reducing the risk of injury. Laminated glass can be incorporated with heat-strengthened and Tempered Glass to further increase impact resistance.
It can be made into clear laminated glass, colored laminated glass, Triple Laminated Glass, laminated Insulated Glass , printed laminated glass, Low-E Laminated Glass, toughened laminated glass, tempered laminated glass and so on. Colored laminated glass can be reach by colored PVB, color tinted glass, and also printed laminated glass, depend on customer's design request.
Laminated building glass,laminated glass price,laminated glass cut to size,toughened laminated glass,white laminated glass
Shanghai Lead Glass Co.,Ltd , https://www.leadglazing.com