How to carry out maintenance and maintenance after European version of Epox is used for a period of time

The European jaw crusher, also known as the European version, is commonly used for primary or secondary crushing in mine material crushing. The European version of the jaw crusher is an advanced equipment developed for the crushing of stone materials used in construction, such as highways, railways and airport runways. The European version jaw crusher adopts the most advanced crushing technology and manufacturing level in the world, and is the first choice for efficient crushing of hard and strong abrasive materials. Compared with the traditional jaw crusher, the European jaw crusher shows its unparalleled advantages in terms of service life, maintenance rate and failure rate.
After the customer purchased the European jaw crusher, he did not know how to maintain it. For the European jaw crusher, the maintenance of the machine is an extremely important and regular work. It should be closely coordinated with the extreme operation and maintenance, and full-time personnel should be on duty. Below, Shanzhuo Heavy Industries simply explains how to maintain the European jaw crusher.
1, the shaft bears the full load of the negative machine, so good lubrication has a great bearing on the bearing life, it directly affects the service life and operating rate of the machine, thus requiring the injected oil must be clean, the seal must be good, the machine's Main oil filling points (1) Rotating bearings (2) Roller bearings (3) All gears (4) Moving bearings, sliding planes.
2. The newly installed tires are prone to loosening and must be checked frequently.
3, pay attention to the work of all parts of the machine is normal.
4, pay attention to check the wear of wear parts, always pay attention to replace the worn parts.
5, put the mobile device's chassis plane, should go out of dust and other things to avoid the machine encountered the material can not be broken when the moving bearing can not move on the chassis, resulting in serious accidents.
6. If the bearing oil temperature rises, you should immediately stop and check the cause to eliminate it.
7. When the rotating gear is in operation, if there is impact sound, it should immediately stop and check, and eliminate.
Tips: Customers who want to understand our company's products can call us
400 Free Hotline Hand Machine

222

Palm Oil Mass Flow Meter

Zhejiang Sealand Technology Co., Ltd. is a trustworthy manufacturer of Palm Oil Mass Flow Meter, Palm Oil Mass Flowmeter, Palm Oil Coriolis Mass Flow Meter, Palm Oil Coriolis Mass Flowmeter, Palm Oil Flow Meter, ATEX, IECEx & CE approved.

With its high accuracy, wide rangeability and reliable performance, Sealand meter has been applied in many kinds of industries during the last 8 years. Unlike others who only focus on the measurement of liquid at normal pressure & temperature, Sealand has conquered the difficulty in the measurement under severe conditions, such as high pressure, high viscosity, high & low temperature.

Besides, Sealand lab is
1. Controlled completely by automatic system, to minimize personal error.
2. Equipped with 3 METTLER TOLEDO scales with accuracy 0.014%.
3. Device extended uncertainty: 0.05%.
4. Certified by Zhejiang Institute of Metrology which is authorized by ILAC; Sealand meters are also approved by them after test in their lab with ISO/IEC 17025:2005 standard.

Palm Oil Mass Flow Meter, Palm Oil Mass Flowmeter, Palm Oil Coriolis Mass Flow Meter, Palm Oil Coriolis Mass Flowmeter, Palm Oil Flow Meter

Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeter.com