The natural straw wallpaper is composed of natural straw and paper paddles. It is mainly made by hand, and it has no regularity on the seam. Therefore, the following points should be noted during construction:
1. Use sticky glue, it is recommended to use straw special glue;
2. Ensure that the wall surface is flat, varnished and the construction environment is clean and dust-free;
3. Gluing method:
A: Machine construction, glue on the back of the paper, seal with the edge band on the side and brush the glue 30 minutes before the wall;
B: Manual construction: glue on the back of the paper to ensure the viscosity of the glue. Seal it with the edge band (protective tape) on the side, so that the glue will not overflow, and brush the glue 30 minutes before the wall;
4, using a sharp blade tailoring, cut a section of the seam to fold off a section of the road, to ensure that the slit does not wrinkle, will not burr, pay attention to the degree of force to avoid cutting the wall surface (please cut from the material when cutting )
5. When the seam is torn open, make up the thin glue, pay attention to ensure that the glue does not overflow the seam, and wear white gloves during the construction process.
6. For large area, please use a squeegee (or a dry scraper on a PVC squeegee) to scrape flat and partially drop the grass without affecting the overall effect;
7. After the seam is filled with glue, please use a special soft pressure roller to gently press to ensure the joint, and use a dry towel or sponge to suck out a small part of the glue (try to ensure that the glue does not overflow).
Poly Solar Panels,Solar Energy Panel,Solar Power Panel,Solar Panels With Ce
ZHONGWEI CITY YINYANG NEW ENERGY , http://www.yinyangnewenergy.com