Wallpaper construction is an art, the tools required must be professional, the following are the conventional tools used in wallpaper construction:
1. Gluing machine: paper output and glue. After the construction, clean the residual glue on site. (roller: clean and wash in time, squeeze out moisture)
2, wallpaper glue: it is recommended to use imported wet glue, it is not recommended to use powder glue, and pay attention to the deployment method, the proportion
3, the blade: different wallpapers use different blades, generally can be roughly divided into large and small blades.
4. Roller: Cannot be used when the machine is glued. Pay attention to clean up and wash in time, and squeeze excess water before applying glue.
5, cutting knife: in order to keep the wallpaper straight, you must use a special cutting knife.
6. Pressure roller: keep it clean, do not touch the residual glue, and wipe it frequently.
7, scraper: drive out the excess glue, excess air bubbles.
8, brush: smooth the surface of the wallpaper, not soaked
9, protective belt: requires light and thin, do not eat glue, the role: to protect the wallpaper surface from wallpaper glue pollution
10, edge banding glue: suitable for maintenance joints
11, and paper tape: strengthen the joint strength of the wallpaper seams, to ensure that the seams are not cracked
12, plastic buckets, buckets: use glue, clean the towel when used separately. It must be kept inside and outside every day, and there is no glue left on the edge of the barrel. The residual glue and sewage need to be brought back, and the sewer pipe that does not enter the customer site is not obtained.
13. Ladder: Make a wrap angle and a protective cover to prevent scratching the floor.
14, sponge, towel: white or light color, must be cleaned after use every day.
15, toolbox, toolkit
16, shoe covers
17. Floor protection film: to prevent the finished floor from being contaminated and scratched.
18, wallpaper protective film: easy to pollute, difficult to clean the wallpaper after construction, need to cover the surface of the wallpaper protection
19. Garbage bags: Broken blades should not be discarded by hand. They should be placed in the pockets of the overalls, or carried around and hung in the garbage bags on the side of the ladder. The remaining materials on the site should not be discarded on the floor. Large waste should be placed. In the bag
20, other: plumb line, tape measure, syringe, etc.
Electrolytic copper is a non-ferrous metal with very close relationship with human beings. It is widely used in electric, light industry, machinery manufacturing, construction industry, national defense industry and other fields, second only to aluminum in the consumption of non-ferrous metal materials in our country.
Copper is the most widely used and widely used in the electrical and electronics industries, accounting for more than half of the total consumption. For a variety of cables and wires, motor and transformer windings, switches and printed circuit boards.
Used in the manufacture of machinery and transport vehicles for the manufacture of industrial valves and fittings, gauges, sliding bearings, molds, heat exchangers and pumps.
In the chemical industry is widely used in the manufacture of vacuum, distillation pots, brewing pots.
In the defense industry for the manufacture of bullets, shells, guns and other parts, each producing 1,000,000 rounds of ammunition, the need for copper 13-14 tons.
In the construction industry, used as a variety of pipes, pipe fittings, decorative devices.
Copper Content Of 99.99%
Copper Content Of 99.99%,High Copper Content,Copper Content Enameled Copper,99.99% Copper Content
Ningxia Tongji International Trade Co.,Ltd. , http://www.tongjiinternational.com