For the use and maintenance of range hoods, the following issues should be noted:
1. The range hood is used under the following conditions:
(1) Temperature: -15 ° C - +40 ° C;
(2) Relative humidity: no more than +90% (25 ° C);
(3) Altitude: no more than 1000m.
2. The power outlet of the range hood must use a dedicated socket with a reliable ground wire;
3. Install the range hood according to the instructions. The general installation height should not be lower than 650mm, as far as possible installed directly above the stove;
4. The range hood should be turned on for 1-2 minutes before cooking to obtain better smoke removal effect;
5. Before replacing the bulb and cleaning the range hood, the plug should be unplugged to cut off the power;
6. When replacing the lamp, the power should not exceed the maximum value indicated in the vicinity of the lamp holder and the manual. Otherwise, the temperature rise of the wire and the lamp holder connecting the lamp holder will be too high, and the insulation of the wire insulation will be accelerated, which may cause potential danger of electric shock. Even causing a fire;
7. Clean the oil wheel and the inner cavity of the air duct and the internal and external surfaces of the machine according to the requirements of the manual. Use neutral detergent and soft cloth to avoid damage to the surface or coating of the outer casing.
8. The slop oil in the oil cup will be discarded when it is accumulated to eight minutes to avoid overflow.
9. After cooking, continue to power on for 1-2 minutes to completely drain the residual fumes.
Inductive Proximity Sensor, Detecting Range Eight mm Inductive Proximity Sensor Switch, China Inductive Proximity Sensor
WENZHOU BOSHI SAFETY PRODUCTS CO.,LTD , http://www.osha-lock.com