1. The characteristics of ceramic wall tiles
Ceramic wall tiles are an indispensable wall decoration material in home decoration. Ceramic wall tiles have low water absorption and have strong anti-corrosion and anti-aging properties. In particular, its special resistance to moisture, scrub, weather resistance, other materials can not be replaced, its low price, rich colors, is the family decoration in the kitchen, bathroom, balcony wall surface ideal decoration materials.
2. Types and specifications of ceramic wall tiles
Decorative bricks for wall decoration can be divided into two categories.
The first type is sleeve bricks. The surface of this brick is coated with a colored axial surface, which is processed and fired. It has rich color variations and is particularly easy to clean and maintain. It is mainly used for wall decoration of kitchens and bathrooms. The other type is a whole body wall tile, hard texture, good impact resistance, anti-aging, does not fade, but mostly a single color, mainly for the decoration of the balcony wall.
Ceramic sleeve bricks are mostly rectangular in shape. When used, they are erected and attached, which can increase the visual height after renovation. There are 60 mm × 240 mm, l00 mm × 200 mm, 1l5 mm × 240 mm, 150 mm × 200 mm, l50 mm × 225 mm, 200 mm × 300 mm and other specifications, thickness between 6 ~ l0 mm, You can choose according to your needs.
The body bricks are mostly long strips and should be horizontally affixed when in use, giving people a feeling of stability and stability, 45 mm x 95 mm, 45 mm x 195 mm, 50 mm x 100 mm, 50 mm x 150 mm, 50 mm X200 mm, 60 mm × 240 mm and other specifications, thickness is generally 6 ~ 8 mm, can be selected according to need.
3. Quality appraisal of ceramic wall tiles
Quality identification of ceramic wall tiles should mainly grasp the following points:
(1) The distributor shall ask for the quality inspection certificate and quality inspection report of the product.
(2) Perform visual inspection at the site to observe whether the product has obvious quality defects such as missing sleeves, spots, cracks, axial blister, corrugations, etc. The above defects must not be used.
(3) Hand detection. After the two bricks are clamped by the fingers and hit each other, the sound is crisp and loud and it is a qualified product. The low soundness of the sound must have inherent quality defects.
(4) Perform color difference discrimination. Due to the large number of purchases of wall tiles, if there is a significant color difference between multiple packages, the decoration effect is very much affected. It is necessary to compare the samples of all packages and observe the changes in the color difference. The color difference can not be selected.
(5) It is necessary to examine the specification dimensions one by one. Products with a size error of more than 0.5 mm and a flatness of more than 0.1 mm will not only increase the difficulty of construction, but also have poor results after renovation and cannot be used for engineering.
4. Adhesive types of ceramic wall tiles
Paste ceramic tile wall, there are currently two options, one is to the market to buy finished adhesive directly paste, the other is on-site preparation.
At present, there are three types of adhesives commonly used in the market: the first one is a fast adhesive immediately, and it is a product that can be used directly. When using it, apply a thin layer of glue on the wall surface and the back of the tile. After a few minutes of airing, touch the rubber surface with hand to make it sticky. When pressing on the wall, it can be used very conveniently. The second is jd-503 tile adhesive, the product is a white powder, use the water to adjust into a viscous glue solution. This product not only has strong adsorption power, but also has a certain amount of time to do paste adjustment. The adjusted glue should be used within 4 hours. Generally the thickness of the glue is between 3 and 5 mm. The third type is 903 multi-purpose construction adhesives, which are also used directly. This product has high bond strength and can be adjusted within 2 hours. The thickness of the scraping glue is 2 mm and it is very convenient to use. The use of finished glue paste, the cost is higher, suitable for the selection of the wall surface of the base bucket is often flat, otherwise the paste cost will increase.
The paste of wall tiles in home decoration generally adopts the method of on-site preparation of 107 cement and cement plastic agent. Cement paste 2107 glue 2 water = 100210220 volume ratio of the paste paste paste, bonding thickness within 5 mm, there are several hours to adjust the time, the wall surface requirements are lower, is the most economical and practical glue.
5. Price Analysis of Ceramic Wall Tiles
General domestic axis wall tiles, first-class goods prices at 40 yuan per square meter, deep color axis prices slightly higher than the price of light color bricks, plus auxiliary materials and labor costs, the cost of 80 yuan per square meter. Using different methods of sticking, the price will be different, with the highest price for finished products glue. The price of imported color wall tiles is 1-3 times higher than domestic ones, and the price per square meter is between 80 and l70 yuan. At present, the quality of color-coded wall tiles produced in China has reached the international level. It is recommended that home-made products be used as far as possible during home decoration. The price of bricks is slightly higher than that of color-colored sleeve bricks. Generally, the price per square meter is 5 to 10 yuan higher. Currently, there are nearly 10,000 domestic enterprises producing wall tiles, and the quality and price vary greatly. Therefore, under the premise of ensuring quality, Seriously price comparison before purchasing.
Entrance decoration children's room decoration home decoration cement decoration kitchen wall tile bathroom tile color bathroom wall tile bathroom tile bathroom size tile adhesive tile price kitchen tile balcony tile tile specification
Wooden table lamp, classic, modelling is simple, suit Chinese style to decorate. The whole is mainly made of wood materials, suitable for indoor places such as bedrooms, living rooms, dining rooms and studies. Wooden table lamp can be said to be a kind of table lamp that can be full of originality, wood grain color and luster is natural, feeling back to nature.And the beauty of the wood with the warmth of the light, a strong retro flavor, can bring a kind of unique flavor to the bedroom. We insist on independent design and independent research and development.
Wooden Table Lights,Wood Magnetic Table Lamps,Wooden Tripod Table Lamps,Wooden Lamp Tables
INSHINE LIGHTING CO.,LTD , https://www.inshinelight.com