In the process of renovating a new house, we will inevitably come into contact with many professional terms related to decoration, and most owners do not know what they mean when they hear these professional terms, such as the minimum pit distance of the toilet, which is likely to cause Some unnecessary losses, so what does the minimum toilet pit distance mean ? The following editor will tell you what the minimum toilet pit distance means and how to measure the toilet pit distance more accurately.
1. What does the minimum toilet pit distance mean?
1. First, let me introduce to you what the toilet pit distance is. The toilet pit distance refers to the distance between the position of the toilet downpipe to the center and the wall. The distance is 300mm, 400mm, etc. When choosing a toilet, first look at the toilet Whether the pit distance is appropriate.
2. The normal pit distance of the toilet is 300mm or 400mm. When installing the toilet, 20mm must be reserved. This 20mm is the distance between the toilet and the wall tiles. The distance between the wall and the center line of the toilet drain should be 320mm or 420mm, and the error is normal within 10mm.
3. If the pit distance of your home is 400mm and the distance of the toilet pit you install is 300mm, the military force between the wall and the toilet tank is 100mm. On the contrary, if the pit distance of your home is 300mm and the distance of the toilet pit you install is 400mm, there will be a situation where the sewer and the toilet drain hole cannot match, and there is no way to install it.
Second, how to measure the toilet pit distance more accurately
1. There are two types of toilet outlets: atmospheric row and horizontal row. The floor row can choose siphon and straight flush toilets. The horizontal row can only be installed with straight flush toilets, and the pit distance of the horizontal row is mostly 180mm. The pit distance of the row is very complicated, with 200mm, 400mm, 305mm, etc.
2. The measurement method of toilet pit distance is very simple, that is, the distance from the center of the drain pipe to the wall is measured, but everyone also needs to consider the thickness of the wall tiles during the measurement process. The pit distance on the market is 400mm. 380mm, because the manufacturer has reserved 20mm as the thickness of the wall tiles.
3. Some people say that the old toilet in the house has not been removed. How should the toilet pit distance be measured? Even if the toilet blocks the sewer, we have a way to measure the pit distance. If your home does not live on the top floor, you can measure the distance between the center of the toilet downpipe and the wall above your bathroom, but if your home is equipped with a suspended ceiling, you need to remove part of the buckle plate to make the measurement. If your family lives on the top floor, you have to go downstairs to make a measurement.
Editor's summary: The above is what the minimum toilet pit distance means and how to measure the toilet pit distance more accurately. I believe you have seen the toilet pit distance here. The toilet is very important to people. In the process of installing the toilet, because of lack of experience, various problems are prone to occur, so everyone should understand the relevant knowledge of toilet installation before installing the toilet!
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.
Pipe Nipples are used to allow plumbing to be connected to a water heater or other plumbing. They are used to fit straight end hose or pipe. A combination of pipe nipples are recommended for low-pressure discharge and suction service for various compatible liquids and not for compressible products like air, nitrogen or steam.
Stainless Steel: ASTM A 403
Grade: WPS/WPW 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347HCarbon Steel: ASTM A 234
Grade: WPB/WPBW, (IBR/Non IBR)
Alloy steel: Astm A234
Grade: WP1,5,7,9,11,22,12,91
Types : Elbow, Tee, Reducer, Return Bends, Stub-Ends, Cap, Cross etc.
Size : 1/8"NB TO 48"NB. (seamless & welded) DN15– DN1200
Wall thickness : sch. 5s to sch.xxs
A234Wp11 Elbow,A234Wp11 Pipe Fitting,A234Wp5 Elbow
Shijiazhuang Bang dong Pipeline Technology Co,Ltd. , https://www.bd-pipefitting.com