The production of PE-XE pipe by the plunger method has the advantages of simple production process, small investment in single equipment, and no need for subsequent cross-linking. However, one of the most important drawbacks of this production method is the low production efficiency, that is, the speed of the single pipe production line is extremely low. The speed of the single-pipeline production of the screw-type plastic pipe can reach 20 m/min or more, but the speed of the single-pipeline production of the PE-XE pipe by the plunger method generally does not exceed 1.5 m/min.
Plunger method PE-XE production line speed working principle Piston method stamping method The key technology of extrusion PE-XE pipe production line is to use the crank linkage mechanism to convert the continuous rotary motion of the crank into the intermittent up and down reciprocating motion of the plunger; the plunger will The raw materials are intermittently punched into the flow passage, and the structurally optimized flow passage converts the intermittently entered solid raw materials into continuously extruded viscoelastic PE-XE pipe preforms.
The PE-XE melt must remain in the die for a sufficient period of time to allow the peroxygen to decompose and complete the crosslinking reaction with the PE. Factors affecting production speed The first of the above three items is to optimize the design of the RAM host to achieve the best production conditions. The speed of the plunger push is proportional to the frequency and stroke of the plunger movement. Generally speaking, the higher the frequency, the larger the stroke and the larger the amount of pushing material. But the improvement of these two items will also increase the vibration of the equipment. The optimized design and actual production test are optimized at a frequency of 4-8 times/s and a stroke of 30-40 mm.
PE-XE melt viscosity is very high, which is the reason why reciprocating extrusion must be used. The flow speed of such a high melt is limited when flowing; the screw of the working element in the screw extruder is a continuous rotary motion. The plunger of the working element extruded by the plunger method performs reciprocating motion, and the continuous rotation motion can work smoothly at a high rotational speed, and the faster the reciprocating motion speed, the greater the vibration.
PE-XE melt viscosity can be changed with few parameters, and some improvement can be made by adjusting the raw material formulation, but the production speed can be improved by improving the frictional properties of the melt and the mold surface. The third article is one of the most worthwhile topics for research. This one does not solve the problem, and the improvement of the last two can not greatly increase the output. In order to make the PE-XE pipe completely complete the cross-linking reaction and leave the mold, it is necessary to stay in the mold for a sufficient period of time. Second, there must be sufficient temperature, and the number of the three-crossing connection should be appropriate. The mold temperature is limited and it is impossible to rise to the temperature above the decomposition.
Solutions to increase production speed Through the above analysis, three effective solutions for increasing the output of plunger-punched PE-XE pipes are obtained: moderately increasing the mold temperature and lengthening the die and mandrel length. After the above optimization, the production speed of the pipe of 20×1.9 can reach 1.8 m/min or more. Adding additives to improve the friction properties of the melt and the mold; optimizing the stroke and frequency of the plunger.
Manual Grinding And Polishing Machine
Save time during preparation and cleaning
Intuitive thin-film panel controls are easy to operate.
Quick cleaning features include retractable softener, disposable bowl-shaped lining and 360-degree flushing.
D disks are easy to replace.
Choose the best solution to meet the needs of the laboratory
Choosing 8 "and 10" size base discs optimizes sandpaper and diamond costs when larger units are not required
Manual Grinding And Polishing Machine,Buffer Grinder Machine,Grinding And Polishing Machine,Grinding And Lapping Machine
TROJAN (Suzhou) Technology Co., Ltd. , https://www.trojanmaterial.com