First, water: pools, basins, sanitary ware, water pipes, heating, etc.
Look at: whether the installation of the pool, basin, and sanitary fixture is smooth, firm, and straight; whether the upper and lower waterway pipelines are straight, whether the fasteners have been installed, and whether the joints are leaking and seepage.
Second, electricity: power lines (sockets, switches, lamps), television, telephone.
Look: Whether the power line uses the national standard copper wire, the general lighting and socket use the 2.5 square line; the kitchen and bathroom use the 4 square line, if the power line is multi-strand wire but also solder processing can be connected to the switch socket; TV and telephone The signal line should be kept at a certain distance from the power cable (not less than 250mm). The installation of the lamps should use metal hanging points, and they should be tested one after the other.
Third, tile: tile (wet paste, dry paste), stone (wet paste, dry hanging).
Look: Before the construction, we need to pre-select the pre-selection process. Divide the materials of different specifications into several categories, place them in different rooms or planes respectively so that the bricks are aligned, and use the material of the individual curling angles as the cutting material. Use lower quality materials to produce better results.
Fourth, wood: doors and windows, ceiling, closet, wall skirts, heating cover, floor.
Look: Select wood must be selected to dry the material, so as to avoid future deformation; wood to be painted with fire-resistant anti-corrosion materials can be used before, blockboard to use high quality materials. Large-scale ceilings and skirts are not less than 8 fixed points per square meter. Metal hanging points are used for suspended ceilings. Materials used for doors and windows should be made of better materials to prevent deformation. The wood on the floor should be larger (not less than 6×6).
Fifth, oil: paint (clear oil, mixed oil), paint, paste, soft package.
Look: The most important thing is the surface treatment of the decoration. The paint must be made of high-quality materials. Before the brushing or painting, the surface treatment must be done. The mixed oil is first put on the surface of the wooden device and the putty is smoothed. After the polishing, the paint is sprayed on the surface. Before the wall paint is applied again, it is necessary to use a primer (in order to block the acid-base reaction between the wall and the top coat) to prevent discoloration of the wall surface.
Three Tree Lacquered Living Room Ceiling Lacquer Socket Switch Heater Windows Floor Tiles Kitchen Ceilings Wall Cabinets Closet Doors Floor Tiles Tiles Specifications
Product Features
1. The product is easy to open and close, which can effectively seal deep well plates, sample tubes, etc., which is convenient for operation and saves time.
2. Good airtightness can prevent the volatilization of various solvents.
3. Tolerate a wide temperature range, suitable for various experiments.
4. Resistant to chemical corrosion and used for low-temperature storage.
5. The pre-opened silica gel lid allows the Pipette tip or probe to enter the hole without damaging the lid.
6. After the third party inspection, no RNA/DNA enzyme contamination
7. It can be used on automated machines, and the product size conforms to the SBS standard
8. It can be used with stickers, silica gel, and sealed without leakage. 96 round-hole silica gel and 8-hole silica gel strip with matching sealing plate
9. Good flatness, can be transported long distance after sealing with heat sealing film
10. The products are produced and packaged in a 100,000-class dust-free workshop, and the product quality is stable
11. Alphabetical sorting and cut corner marking make the storage and collection of samples more convenient and faster.
12. Each package has an independent article number and batch number identification, which is convenient for quality tracking and traceability
Film Seals,Sealing Film For PCR Plates,Sealing Film QPCR,96 Well Plate Sealing Film,Silicone Sealing Mat
Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yonyuemedicalcare.com