1. Is the appearance and internal structure of the house consistent with the sales description and whether the door opening size is convenient for furniture access?
2. Whether the doors and windows are stable and sealed, and whether noise is generated during switching.
3, floor, wall, ceiling whether there are gaps, cracks, water stains, plaster is off.
4, visual, intercom system is normal.
5. Whether the switch can be switched freely and whether the socket has electricity (use a test pencil test).
6, whether the toilet, kitchen, drainage, smooth, toilet, bathtub is operating normally, whether there are cracks, fewer accessories.
7. Whether the toilet or kitchen floor drain is sufficient (to prevent the outflow of water when an accident occurs).
8. Whether the console size and streamline are used.
9. The kitchen and toilet floors should be drained for 24 hours to inspect the ceiling and adjacent walls of the downstairs for leakage.
10. Use a ruler to clearly measure the inside diameter of each room and record them carefully to facilitate the decoration and purchase of furniture.
You must do it carefully or ask a professional decoration company to help with inspection and acceptance. If any damage is found, it shall be recorded and submitted to the seller for repair as soon as possible. Photographs can be taken when necessary. Another point to remember is to replace the door locks after your stay.
House inspection furniture brand entrance decoration switch furniture toilet decoration design outlet toilet door
Pressure Switch,Hvac Pressure Switch,Low Pressure Switch,Compressor Pressure Switch
LONG TERM ELEC. CO., LTD , https://www.longterm-hvac.com