Talking about the safe operation procedure of lifting platform

The lifting platform is a multifunctional lifting handling machinery.

With the development of social science and technology, hydraulic lifting platforms have been widely used in all corners of social life, and they are used more and more widely. Whether it is architecture, civil engineering, or people's daily life, they are inseparable from the lifting platform.

However, the emergence of lifts has also brought people a safety hazard. How do we safely operate the lift? What is its operating procedure? Then we Ruihai summarized the following:

1. The lifting platform has been inspected and debugged before leaving the factory. The technical indicators meet the design requirements. When using, only the power supply is required, and the hydraulic and electrical systems do not need to be adjusted.

2. Before using the lifting platform, carefully check the hydraulic and electrical systems, and use it without leakage or bare leakage.

3. When the lift is in use, the four legs should be firmly supported on a solid ground (the walking wheel will be off the ground). If necessary, the sleepers can be used.

4. The elevator can run 1-3 times after empty operation.

5. The center of gravity of the load should be as close as possible to the center of the workbench.

6. The movable door at both ends of the protective railing should be locked and locked before operation.

7. When using, tighten the oil return valve knob clockwise, push the manual reversing valve handle to the neutral position, start the motor to make the system work, then pull the reversing handle to the lifting position, the platform rises and reaches the required position. The height causes the reversing handle to be pushed to the neutral position, the lifting platform stops rising, and the motor is turned off to operate. When descending, the oil return valve is released (counterclockwise rotation) and the platform can be lowered by its own weight.

8. When using the manual pump, first tighten the oil return valve knob clockwise, push the handle to the neutral position, and press the handle platform to lift. When descending, release the return valve platform to lower.

Do you know now?

Jinan Ruihai Hydraulic Machinery Co., Ltd. is one of the domestic manufacturers specializing in the production of hydraulic lifts , lifting platforms and aluminum alloy lifts . It is a member of China Lifting and Transportation Warehousing and Logistics Association and a contract-honoring and trust-keeping unit. Widely used in the interior and exterior decoration of the construction industry, workshops, stations, supermarkets, halls and other high-altitude operations and industrial production lines; the lifts and lifting platforms produced by our company are sold throughout the country and are well received by users.

More details, all in Jinan Ruihai Hydraulic Machinery Co., Ltd. ( http:// ) , welcome to call, customer satisfaction is our driving force!