[China Aluminum Network] Orchids are good or bad, and they are inseparable from the two major factors of humidity and ventilation. Humidity includes the humidity of the surrounding environment and the humidity in the basin. The key to ventilation is generally the ventilation of the internal structure of the basin. The humidity of the cultivated orchid environment has been thoroughly explored by many seniors, and the control of the humidity in the basin has rarely been reported. Through years of practice in planting, I developed a "pot moisturizer" for the reference of Lanyou.
This "in-basin moisturizer" is also called "pot water storage device." In the actual use of the process, after a variety of sub-pots, the plants with the same level of strength are selected to be planted in an ordinary blue pot and "potted moisturizer." In about 15 days, the plant material was poured out to observe the orchid roots, and the installation of water tanks in the basin was better than that of the roots grown in common orchids. When the plants need to be fertilized, they can inject the insecticide solution and fertilizer into the cup so that they will not be lost or pollute the environment. In addition, it is very convenient and fun to manage water quality by observing the water level in the basin. The “potted moisturizer†was exhibited in Guangzhou Lanpu’s “Qing Guoqing Lan Zhan†and was praised by many Lanyou.
The basin moisturizer is designed based on the theory of soil capillary action. The production materials include waste plastic bottles, thick-walled aluminum tube hoses, and chemical fiber ropes. The production method is as follows: l. Prepare a relatively thick plastic bottle, cut off the upper part to make a cup, diameter of about 4 - 5cm, height of 4 - 6cm, according to the diameter of the transparent plastic hose used in the cup closer to the bottom Make a hole (available in the same size as the diameter of the hose, and burn the red metal, poke the hole in the cup, it is easy to operate), then insert the optional transparent thick-walled aluminum tube (about 15-18cm), then glue it firmly So that it does not leak water. 2. Choose a hard-walled aluminum tube or aluminum tube as the catheter, with an inner diameter of about 1.2 cm, and a length less than 2-4 cm from the selected orchid height. First put on the absorbent core string, so that the rope protruding tube 2-3cm, and then in the catheter wall with a cone with a hole diameter of 0.2-0.4cm, hole pitch 1-1.5cm holes, these holes are evenly distributed in the tube Then, insert the finished catheter into the center of the cup lid, insert it into the bottom of the cup, and fill the lid with a small hole for ventilation. 3. Select a pot with a higher pelvic diameter and a pelvic diameter greater than 1cm above the diameter of the cup. Place a long round hole with red-hot metal on the wall near the bottom. The diameter is larger than the transparent plastic tube. Two to five times the diameter of the transparent thick-walled aluminum tube, it is easy to assemble the cup with a transparent thick-walled aluminum tube and then hit two small holes about 8-15cm above the long round pot of the flowerpot. At a distance of about 1.2-5 cm, iron wire is put between the two small holes, and a clear plastic tube protruding from the outside of the flower pot is placed on the wall of the pot.
Before planting flowers, insert a small piece of hard material between the wall of the pot and the wall of the cup to fix the water cup. Then, plant the orchid and divide the market into Langen. The tube makes the cup vertical in the middle of the pot. The core head is separated from the blue head. Then, you can make a simple water bottle, use a mineral water bottle, put two holes in the lid, stick two plastic lakes with an inner diameter of 0.5-0.8cm and a length of 6-12cm to complete the use of water bottles. Water is poured into the basin from the transparent plastic pipe, and the water level in the pot is observed from the thick-walled aluminum pipe. There will be a few water droplets flowing from the previous water injection to the bottom of the flower pot. You can record a fuller water level line and engrave the ruler line on the flower pot. After the watering, the water will not be added, causing waste.
The operating principle of the orchid pot insulation reservoir is as follows: Since the synthetic fiber core in the thick-walled aluminum tube sucks up the interior of the cup and raises it to the rope head of the upper protruding conduit, the rope is exposed to the moisture of the plant material. The plant material absorbs and remains moist, and the catheter walls are circulated. The holes can discharge the humid water vapor in the volatile core rope, allowing the orchid root and the plant material to absorb. As long as there is water in the water cup, there will be an elegant play to keep the plant material in the basin moist.
It is designed to create a harmonious combination of pragmatism and elegance. Considering the bathroom is the soul of a home, this towel bar brings function and aesthetics together to make the space comfortable and enjoyable.
Single Towel Rail,Single Towel Rack,Single Towel Bar,Single Towel Holder
Kaiping city Pinsen Sanitary ware Co.,Ltd , https://www.corpthen.com